Environmental Testing

Simulating your package's harshest destination environment is of design importance as it may reveal your package or product's adverse response to its final surroundings.

Land, sea or air transportation and warehouse storage expose your package to extreme temperatures and humidities too. Consideration of these factors during the package/product development stage increase the survivability of your product.

Computer controlled, our chambers can run a myriad of temperature-humidity combinations. Duration at each combination can range from hours to days and is performed automatically as defined by your requirements.

Environmental Chambers: Computer controlled, our Environmental Chambers can be programmed to simulate the dynamic climatic changes your package may undergo during distribution.

Cryogenic temperatures down to -94°F and desert heat up to +160°F can be attained in our walk-in chamber. Relative humidity is controllable from 10% to 95%.

Environmental Chambers: Our 38-inch cube chamber has a range of -22°F to +350°F. Relative humidity is controllable from 10% to 95%.

Environmental Chambers: Our Bench Top Chamber is set at a constant 73°F and 50% relative humidity to provide standard conditioning for packaged-products prior to physical testing. Performance Testing Labs also conducts corrugated fiberboard component testing and medical pouch testing in this controlled environment.

Memberships and Other Links:

Home | Drop Testing | Incline Impact Tester | Drop Testers| Vibration Testing | Repetitive Bounce Vibration Tester | Compression Tester | Environmental Testing | Environmental Chambers | Cobb Testing | Mullen Burst Testing | ECT Testing | Box Compression Testing | Basis Weight Testing | Pin Adhesion Testing | Medical Pouch Testing | Seal Strength Testing | Integrity (Burst) Testing