|
Corrugated Component
Testing
Basis Weight Testing: TIS
0308-01 Soak Method is the procedure used to analyze a specimen
of corrugated fiberboard to determine the basis weights and calipers
of the combined board and its components.
Cobb Testing: ISO 535:1991(E) specifies a method of
determining the water absorptiveness of corrugated fiberboard under
standard conditions.
Mullen Burst Test: T810
om-98 is the procedure used to measure the bursting strength
of singlewall and doublewall corrugated and solid fiberboard.
ECT Testing: T
839 pm-95 is the procedure used to determine the edgewise compressive
strength, parallel to the flutes, of a short column of singlewall
or doublewall fiberboard.
Pin Adhesion Testing: T
821 om-96 is used to measure the force required to separate corrugated
board between the flute tips of corrugated medium and its linerboard
facings.
Memberships and Other
Links:
*ISTA Certified
Laboratory
|
*NMFTA Registered
Laboratory |
*JCPenney Testing Approved
|
*IATA |
*ASTM
|
*IoPP |
| *TAPPI |
|
Home | Drop
Testing | Incline Impact Tester | Drop
Testers| Vibration
Testing | Repetitive Bounce Vibration
Tester | Compression Tester | Environmental
Testing | Environmental Chambers | Cobb Testing
| Mullen Burst Testing | ECT Testing | Box Compression Testing
| Basis Weight Testing | Pin Adhesion Testing | Medical
Pouch Testing | Seal Strength Testing | Integrity (Burst) Testing
|
